Removing stripped Allen screws requires a screw extractor.
A stripped screw can shut down a project fast. Removing this impediment to install a new screw in the old one's place fortunately has a rather simple solution. Screw extractors are designed to quickly and efficiently unscrew a damaged Allen or other screw type.
Instructions
1. Insert the 3/32-inch bit into the drill chuck. Drill a hole straight into the end of the stripped end of the Allen screw, approximately 1/8 inch deep.
2. Hand-rotate the screw extractor into the end of the screw. Finish tightening the extractor counterclockwise into the screw using the vise grips.
3. Grip the vise grips firmly. Continue rotating the grips and extractor until the Allen screw comes out.
Tips Warnings
Double-check the size of extractor needed. Using one that's too large can break the head off the screw, compounding the problem.
Related Posts:
Remove Stubborn Grub Screws
Grub screws are often used to secure collets, gears and faucet handles, among other things. Grub screws, commonly known as set screws, do not have heads. They have either a hole for an Allen wrenc...
Remove Rusted Set Screws
Remove Rusted Set ScrewsWhen rust starts to eat into an object, it can cause all sorts of issues trying to get the problem fixed. In the case of a set screw, it's designed to secure two objects to...
Remove A Stripped Screw From A Computer
A stripped screw in your computer case can prevent you from removing the side panel or from removing the cards within the computer, an undesirable outcome in either case. Correct this issue by usi...
