Sunday, March 9, 2014

Program A Uniden Bc350a Scanner

Program a Uniden BC350A Scanner


The Uniden BC350A scanner comes with 50 programmable channels. Use it to scan police, fire, air, military, local and weather channels. The unit comes complete with a light-up LCD screen, making it simple to view the scanner at night or when it's dark. According to the user manual, you can program non-active frequencies on this scanner. Before you can do any programming, the scanner must be turned on.


Instructions


1. Press the Prog button to start programming the scanner.


2. Press the Search button to begin searching local frequencies. The scanner will move through the frequencies at a fast rate.


3. Press the Hold button to slow down the search once you are near the frequency you want to program into the scanner.


4. Press either the Up or Down arrows to locate the exact frequency you want to store in the scanner.


5. Press the Prog button again, followed by a number key, to store the frequency. You can only store one frequency per number.


6. Press the Prog button again to end programming process.


Tips Warnings


To exit the programming screen, press the Band button at any time.








Related Posts:




  • Program A Uniden Bearcat Bc350a Scanner

    Program a Uniden Bearcat BC350A ScannerThe Uniden Bearcat BC350A base scanner allows you to scan channels on five separate service banks as well as your own customizable private bank. You can save...


  • Program A Uniden Scanner

    Scanners can be programmed to monitor emergency services.Uniden is one of the top names in scanner manufacturers. The North American office sells Uniden products throughout North, Central and Sout...


  • Program A Uniden Bearcat Scanner Bc 140

    Programming a Uniden Bearcat Scanner BC 140 is easy. These scanners are made to be user-friendly. You can enter as many frequencies as you have channels for on the scanner. You do not have to prog...